WSP-12V-1 (Cyclone)


WSP-12V-1 Cyclone submersible pump

12 volt engineered plastic submersible pump

This pump is capable of pumping up to 25 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.


USE WITH: PA-10800 (Low Flow Sampling Controller)

FEATURES

  • can operate under harsh conditions and higher turbidity
  • runs continuously in water without the need for a cool down
  • sleek exterior minimizes well hang-ups
  • very reliable and economical
  • 400 hour motor life

Domed top minimizes well hang ups. Fits 3/8" or 1/2" ID polyethylene tubing. Reinforced, super strong outlet. Computed engineered domed bottom debris screen will separate debris from water, thus extending motor life.


Non-Return Check Valve (optional)

  • Top-fitting accessory used to prevent water back-flow when technician shuts off pump
  • Ideal for Low Flow Sampling
  • Used with Standard and High Performance Engineered Plastic Pumps
WSP-12V-1 CYCLONE SPECIFICATIONS
Dimensions length 7", diameter 1.82"
Maximum Lift Capacity 25 ft (7.6m)
Power Consumption 60 watts (max)
Input Voltage 12-15 volts DC
Maximum Amp Output 4 amps
Use with Optional PA-10800 (Low Flow Sampling Controller)
Supplied with 35 feet of heavy duty 12 gauge wire, Anderson plugs & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous
Materials of Construction

- ABS
- Poly Acetal (POM)
- Stainless Steel
- PVC
- Nitrile
*no PFAS, PFOS or PFOA

Depth Performance Cyclone pump chart

 

 

WSP-12V-2M (Mini-Typhoon)

WSP-12V-2M Mini-Typhoon

12 volt engineered plastic submersible pump

This pump is capable of pumping up to 40 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.


USE WITH: PA-10800 (Low Flow Sampling Controller)


FEATURES

  • can operate under harsh conditions and higher turbidity
  • runs continuously in water without the need for a cool down
  • sleek exterior minimizes well hang-ups
  • very reliable and economical
  • 400 hour motor life

Domed top minimizes well hang ups. Fits 3/8" or 1/2" ID polyethylene tubing. Reinforced, super strong outlet. Computed engineered domed bottom debris screen will separate debris from water, thus extending motor life.


Non-Return Check Valve (optional)

  • Top-fitting accessory used to prevent water back-flow when technician shuts off pump
  • Ideal for Low Flow Sampling
  • Used with Standard and High Performance Engineered Plastic Pumps
WSP-12V-2M MINI-TYPHOON SPECIFICATIONS
Dimensions length 12", diameter 1.82"
Maximum Lift Capacity 40 ft (12.2m)
Power Consumption 105 watts (max)
Input Voltage 12-15 volts DC
Maximum Amp Output 7 amps
Use with Optional PA-10800 (Low Flow Sampling Controller)
Supplied with 50 feet of heavy duty 12 gauge wire, Anderson plugs & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous
Materials of Construction

- ABS
- Poly Acetal (POM)
- Stainless Steel
- PVC
- Nitrile
*no PFAS, PFOS or PFOA

Depth Performance

Mini-Typhoon pump chart

WSP-12V-2 (Typhoon)


WSP-12V-2 Typhoon

12 volt engineered plastic submersible pump

This pump is capable of pumping up to 50 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.


USE WITH: PA-10800 (Low Flow Sampling Controller)


FEATURES

  • can operate under harsh conditions and higher turbidity
  • runs continuously in water without the need for a cool down
  • sleek exterior minimizes well hang-ups
  • very reliable and economical
  • 400 hour motor life

Domed top minimizes well hang ups. Fits 3/8" or 1/2" ID polyethylene tubing. Reinforced, super strong outlet. Computed engineered domed bottom debris screen will separate debris from water, thus extending motor life.


Non-Return Check Valve (optional)

  • Top-fitting accessory used to prevent water back-flow when technician shuts off pump
  • Ideal for Low Flow Sampling
  • Used with Standard and High Performance Engineered Plastic Pumps
WSP-12V-2 TYPHOON SPECIFICATIONS
Dimensions length 12", diameter 1.82"
Maximum Lift Capacity 50 ft (15.25m)
Power Consumption

120 watts (max)

Input Voltage 12-15 volts DC
Maximum Amp Output 8 amps
Use with Optional PA-10800 (Low Flow Sampling Controller)
Supplied with 60 feet of heavy duty 12 gauge wire, cigarette plug & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous
Materials of Construction

- ABS
- Poly Acetal (POM)
- Stainless Steel
- PVC
- Nitrile
*no PFAS, PFOS or PFOA

Depth Performance

Typhoon pump chart

WSP-12V-3 (Tempest)


WSP-12V-3 Tempest

12 volt engineered plastic submersible pump

The WSP-12V-3 Tempest pump is capable of pumping up to 60 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.


USE WITH: PA-10800 (Low Flow Sampling Controller)

FEATURES

  • can operate under harsh conditions and higher turbidity
  • runs continuously in water without the need for a cool down
  • sleek exterior minimizes well hang-ups
  • very reliable and economical
  • 400 hour motor life

Domed top minimizes well hang ups. Fits 3/8" or 1/2" ID polyethylene tubing. Reinforced, super strong outlet. Computed engineered domed bottom debris screen will separate debris from water, thus extending motor life.


Non-Return Check Valve (optional)

  • Top-fitting accessory used to prevent water back-flow when technician shuts off pump
  • Ideal for Low Flow Sampling
  • Used with Standard and High Performance Engineered Plastic Pumps
WSP-12V-3 TEMPEST SPECIFICATIONS
Dimensions length 17", diameter 1.82"
Maximum Lift Capacity

60 ft (18.3m)

Power Consumption

165 watts (max)
Input Voltage 12-15 volts DC
Maximum Amp Output 11 amps
Use with Optional PA-10800 (Low Flow Sampling Controller)
Supplied with 70 feet of heavy duty 12 gauge wire, Anderson plugs & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous
Materials of Construction

- ABS
- Poly Acetal (POM)
- Stainless Steel
- PVC
- Nitrile
*no PFAS, PFOS or PFOA

Depth Performance

Tempest pump chart

WSP-12V-4 (Mini-Monsoon)


WSP-12V-4 Mini-Monsoon

12 volt engineered plastic submersible pump

This pump is capable of pumping up to 70 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.


USE WITH: PA-10800 (Low Flow Sampling Controller)

FEATURES

  • can operate under harsh conditions and higher turbidity
  • runs continuously in water without the need for a cool down
  • sleek exterior minimizes well hang-ups
  • very reliable and economical
  • 400 hour motor life

Domed top minimizes well hang ups. Fits 3/8" or 1/2" ID polyethylene tubing. Reinforced, super strong outlet. Computed engineered domed bottom debris screen will separate debris from water, thus extending motor life.


Non-Return Check Valve (optional)

  • Top-fitting accessory used to prevent water back-flow when technician shuts off pump
  • Ideal for Low Flow Sampling
  • Used with Standard and High Performance Engineered Plastic Pumps
WSP-12V-4 MINI-MONSOON SPECIFICATIONS
Dimensions length 20", diameter 1.82"
Maximum Lift Capacity

70 ft (21.3m)

Power Consumption 195 watts (max)
Input Voltage 12-15 volts DC
Maximum Amp Output 13 amps
Use with Optional PA-10800 (Low Flow Sampling Controller)
Supplied with 80 feet of heavy duty 12 gauge wire, Anderson plugs & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous
Materials of Construction

- ABS
- Poly Acetal (POM)
- Stainless Steel
- PVC
- Nitrile
*no PFAS, PFOS or PFOA

Depth Performance

Mini-Monsoon pump chart

WSP-12V-3B (Super Twister)

WSP-12V-3B Super Twister

12 volt engineered plastic submersible pump

This pump is capable of pumping up to 85 feet from ground level by simply connecting it to a 12 volt battery.


USE WITH: PA-10800 (Low Flow Sampling Controller)

FEATURES

  • can operate under harsh conditions and higher turbidity
  • runs continuously in water without the need for a cool down
  • sleek exterior minimizes well hang-ups
  • very reliable and economical
  • 400 hour motor life

Domed top minimizes well hang ups. Fits 3/8" or 1/2" ID polyethylene tubing. Reinforced, super strong outlet. Computed engineered domed bottom debris screen will separate debris from water, thus extending motor life.


Non-Return Check Valve (optional)

  • Top-fitting accessory used to prevent water back-flow when technician shuts off pump
  • Ideal for Low Flow Sampling
  • Used with Standard and High Performance Engineered Plastic Pumps
WSP-12V-3B SUPER-TWISTER SPECIFICATIONS
Dimensions length 22", diameter 1.82"
Maximum Lift Capacity

85 ft (25m)

Power Consumption 195 watts (max)
Input Voltage 12-15 volts DC
Maximum Amp Output 13 amps
Use with Optional PA-10800 (Low Flow Sampling Controller)
Supplied with 90 feet of heavy duty 10 gauge wire & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous
Materials of Construction

- ABS
- Poly Acetal (POM)
- Stainless Steel
- PVC
- Nitrile
*no PFAS, PFOS or PFOA

Depth Performance

Super-Twister pump chart

WSP-12V-5 (Tornado)

WSP-12V-5 Tornado

12 volt engineered plastic submersible pump

This pump is capable of pumping up to 100 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.


USE WITH: PA-10800 (Low Flow Sampling Controller)

features

• can operate under harsh conditions and higher turbidity

• runs continuously in water without the need for a cool down

• sleek exterior minimizes well hang-ups

• very reliable and economical

• 400 hour motor life

Domed top minimizes well hang ups. Fits 3/8" or 1/2" ID polyethylene tubing. Reinforced, super strong outlet. Computed engineered domed bottom debris screen will separate debris from water, thus extending motor life.


Non-Return Check Valve (optional)

  • Top-fitting accessory used to prevent water back-flow when technician shuts off pump
  • Ideal for Low Flow Sampling
  • Used with Standard and High Performance Engineered Plastic Pumps
WSP-12V-5 TORNADO SPECIFICATIONS
Dimensions length 27", diameter 1.82"
Maximum Lift Capacity 100 ft (30m)
Power Consumption

210 watts (max)

Input Voltage 12-15 volts DC
Maximum Amp Output 14 amps
Use with Optional PA-10800 (Low Flow Sampling Controller)
Supplied with 110 feet of heavy duty 10 gauge wire & battery clamps
Required Tubing 3/8" or 1/2" ID LDPE
Duty Cycle Continuous
Materials of Construction

- ABS
- Poly Acetal (POM)
- Stainless Steel
- PVC
- Nitrile
*no PFAS, PFOS or PFOA

Depth Performance

Tornado pump chart