Top Weights

• Both 2 inch and 4 inch Spring Clips illustrated
• Spring clip are for attaching tether line to HydraSleeve when no top weight is used.
• Spring clips are included when you purchase an 11 ounce Top Weight
• Reusable

Please leave a minimum slack in the tether line equal to the length of the Sampler you are using to allow the Sleeve to compress into the bottom of the well.  A minimum of 48 hours should be allowed for equilibration time.

• 11-ounce top weight with spring clip
• For optional use with 2 inch, 600 ml and 1 L HydraSleeves
• Also for use with 4 inch, 2.5 L  HydraSleeve
• Top section is PVC and the bottom is stainless.
• Reusable
• Includes spring clip for attaching tether line

Please leave a minimum slack in the tether line equal to the length of your sampler to allow the Sleeve to compress into the bottom of the well.  A minimum of 48 hours should be allowed for equilibration time.

• Special 2-piece PVC Collar for use with SuperSleeves when Top Weight for compression into the bottom of the well is not needed.
• Similar to SuperSleeve top weight, the SuperSleeves thread between the top portion and locking ring and are held in place by the threads.
• Consists of a top threaded portion, and a threaded locking ring.
• Spring Clip tether attachment included
• To be used in conjunction with bottom weight (5, 8 or 11 ounce bottom weight recommended)
• Sand weight will not work because of the lack of density in water.

• Optional two-piece 35-ounce top weight for use with SuperSleeves
• Top section is PVC and the bottom is stainless.
• the SuperSleeves feed between the top portion and locking ring and are held in place by the threads..
• Spring Clip tether attachment included
• Reusable
• Should be used in conjunction with 5, 8 or 11 ounce bottom weights
• Sand weight will not work because of the lack of density in water