skip to Main Content

(905) 238-5242
sales@waterra.com

(905) 238-5242
sales@waterra.com

SIMPLE SOLUTIONS FOR GROUNDWATER MONITORING SINCE 1985
SIMPLE SOLUTIONS FOR GROUNDWATER MONITORING SINCE 1985

Waterra High Flow System

CA$ 0.00

High Flow System: – deep well sampling

up to 4 gpm  (15 lpm)  & max 300 feet  (90 m)

The Waterra High Flow System is designed to be used in 2 inch (5 cm) wells or larger where a high pumping rate is desired or where very deep wells are encountered. This system is also an excellent well development tool in 2 inch (5 cm) piezometers.

High Flow system lift of over 200 feet (60 m) in 2 inch (5 cm) monitoring wells and flow rates of up to 4 gallons per minute (15 lpm) may be achieved.

Foot Valves are available in Delrin and Stainless Steel.

Learn More about Waterra Pump System

CHOOSE FROM THE OPTIONS PRESENTED BELOW:

Coil Lengths
Voltage
Well Size

Description

Here’s How a Waterra Pump Works

The Waterra Pump System is a simple, inexpensive way to sample a monitoring well. This is how it works.

  1. A Waterra Foot Valve is attached the bottom end of a length of Waterra Tubing.
  2. The Foot Valve – Tubing combo is inserted into the well, Foot Valve first, until the valve is submerged beneath the water table to the desired pumping depth.
  3. The tubing is then oscillated (pulled up and then pushed down) over a short vertical range of motion either by hand or with a Waterra Tubing Actuator.
  4. Water builds up in the oscillating tubing until it discharges at surface.

Related Products…

Back To Top