Waterra Pump High Flow System
High Flow System: – deep well sampling
up to 4 gpm (15 lpm) & max 300 feet (90 m)
The Waterra Pump High Flow System is designed to be used in 2 inch (5 cm) wells or larger where a high pumping rate is desired or where very deep wells are encountered. This system is also an excellent well development tool in 2 inch (5 cm) piezometers.
High Flow system lift of over 200 feet (60 m) in 2 inch (5 cm) monitoring wells and flow rates of up to 4 gallons per minute (15 lpm) may be achieved.
Waterra Foot Valves are available in Delrin and Stainless Steel.
Learn More about Waterra Pump System
CHOOSE FROM THE OPTIONS PRESENTED BELOW:
Here’s How a Waterra Pump Works
The Waterra Pump High Flow System is a simple, inexpensive way to sample a monitoring well. This is how it works.
- A Waterra Foot Valve is attached the bottom end of a length of Waterra Tubing.
- The Foot Valve – Tubing combo is inserted into the well, Foot Valve first, until the valve is submerged beneath the water table to the desired pumping depth.
- The tubing is then oscillated (pulled up and then pushed down) over a short vertical range of motion either by hand or with a Waterra Tubing Actuator.
- Water builds up in the oscillating tubing until it discharges at surface.
Waterra 0.1 Micron Groundwater Filter$USD 12.80 – $USD 1,180.00
Waterra 0.45 Micron (FHT & FMT) Groundwater Filter$USD 12.80 – $USD 1,180.00
Waterra Water Level Indicators / Sensors$USD 479.00 – $USD 625.00
Waterra 0.22 Micron Groundwater Filter$USD 12.80 – $USD 1,180.00