skip to Main Content
Select Language

(905) 238-5242
sales@waterra.com

(905) 238-5242
sales@waterra.com

SIMPLE SOLUTIONS FOR GROUNDWATER MONITORING SINCE 1985
Select Language
SIMPLE SOLUTIONS FOR GROUNDWATER MONITORING SINCE 1985

Waterra Pump Nano Flow System

$USD 0.00

Nano Flow System: – drive points

up to 1/4 gpm (1 lpm) &  max 50 feet ( 15 m)

The Waterra Micro Flow System is popular for use in direct push technology micro well installations and multi-level installations for ground water sampling. Also used in collapsed wells or wells with obstructions.

The SS-6 and SS-9 Stainless Steel Foot Valves can pump from as deep as 50 feet (15 m) and flow rates with this system are usually less than 1/4 gallon per minute (1 lpm).

Learn More about Waterra Pump System

CHOOSE FROM THE OPTIONS PRESENTED BELOW:

Coil Lengths
Coil Lengths

Description

Here’s How a Waterra Pump Works

The Waterra Pump Nano Flow System is a simple, inexpensive way to sample a monitoring well. This is how it works.

  1. A Waterra Foot Valve is attached the bottom end of a length of Waterra Tubing.
  2. The Foot Valve – Tubing combo is inserted into the well, Foot Valve first, until the valve is submerged beneath the water table to the desired pumping depth.
  3. The tubing is then oscillated (pulled up and then pushed down) over a short vertical range of motion either by hand or with a Waterra Tubing Actuator.
  4. Water builds up in the oscillating tubing until it discharges at surface.

Related Products…

Back To Top