Waterra Hydrolift Tubing Actuator – Groundwater Sampling

The Waterra Hydrolift Tubing Actuator as well as other Tubing Actuators assist in the operation of the Waterra Pump System. Although sometimes expedient, the manual operation of a Waterra Pump can be a strenuous experience. Purging and sampling deep wells or a large number of monitoring wells is simply not feasible by hand.

Waterra Tubing Actuators will deliver a significant boost to field productivity.

Portable Mechanical Advantage
The Waterra Lever Arm – Tubing Actuator is a manual lever designed to provide operators with a convenient, portable mechanism which would provide some mechanical advantage when manually operating the Waterra Pump as well as facilitating the collection of samples with this system.

This Tubing Actuator will fasten onto most above ground well completions quickly and easily. The tubing clamp is designed to accept Low Flow, Standard Flow and High Flow tubing. The handle is adjustable in order to accommodate various casing diameters and desired stroke lengths.

The Lever Arm weighs approximately 8 pounds (3.6 kg).

This Tubing Actuator is the best choice for the occasional light duty user of the Waterra Pumping System (Low, Standard, and High Flow).

• Fully adjustable
  The Lever Arm is fully adjustable and will adapt to almost any size casing or protective well casing. An above ground well completion is required in order to use the Lever.
• One handed operation
  Using the Lever Arm can make sample collection easier because it supports the discharge end of the pump’s tubing, allowing the field technician to operate the Waterra Pump with one hand and hold a sample container with the other.
• Hinged tubing clamp
  The tubing clamp is hinged, which helps prevent pump tubing from abrading against well casing.
• Reduces fatigue
  This hand Lever can reduce some of the fatigue that one may experience when required to purge large volumes from wells.
• Suitable for use with Low, Standard and High Flow Waterra Pumping Systems
• Adapts to almost any size casing or protective well casing

Dimensions
   L           W         H
15 in      7 in      20 in
38 cm  18 cm   51 cm

Weight
38 pounds (17.25 kg)

Electric Motor
110 V or 220 V
6 amps
3/4 hp  (560 watts)

Actuator Stroke
4 in (10 cm)
0 – 140 cycles per min

High Performance Automation
The Hydrolift is a portable, electrically operated device that is used to automate the operation of the Waterra Pump System. The Hydrolift is powered by a 3/4 horsepower (560 watts) electric motor (available in either 110 volt or 220 volt) and generates a 4 inch (10 cm) stroke at up to 140 cycles per minute. The Hydrolift weighs about 35 pounds (16 kg) and requires an electrical power supply of at least 1000 watts.

This actuator is perfect for purging and sampling 2” (5 cm) diameter monitoring wells up to 200 feet (60 m) deep. In special circumstances it can lift up to 300 feet = 90 m. This electrical Tubing Actuator is optimized to operate with the Standard Flow System up to its maximum effective depth and will operate with the High Flow System up to a depth of 150 feet (45 m).

This Tubing Actuator is the ideal choice for the frequent user of the Waterra Pumping System with moderate to extreme pumping requirements (Low, Standard and High Flow). Using the Hydrolift will result in a big boost to your field sampling program.

• fully adjustable — the Hydrolift is fully adjustable and will adapt to almost any size casing or protective well casing and can also be used with flush grade well completions.
• anchored discharge end of tubing — the Hydrolift supports the Waterra Tubing and also anchors the discharge end of the tubing facilitating sample collection.
• available in either 110 volt or 220 volt AC
• great for use when developing monitoring wells
• reduces fatigue — the use of this automated Waterra Pump System Tubing Actuator will eliminate the fatigue that can be experienced on large monitoring programs.
• hinged tubing clamp
• suitable for use with  Low, Standard Flow and High Flow Waterra Pumping Systems
• adapts to almost any size casing or protective well casing

Would you like to try a Hydrolift? Both Canadian and US offices maintain a fleet of Hydrolifts available for both short and long term rentals, beginning with a 2 day minimum rental period. You are not billed for time in transit though you would be expected to pay shipping costs in both directions. Please call for pricing.

Dimensions
   L           W           H
16 in      15 in      23 in
39 cm    37 cm    57 cm

Weight
29 pounds (13 kg)

Gasoline Engine
Honda GX25 (25 cc)
Mini 4 stroke
1 hp  (746 watts)
Regular Gasoline
SAE 10W-30 motor oil

Actuator Stroke
4 in (10 cm)
0 – 140 cycles per min

Power & Portability
The PowerPack provides the mechanical Tubing Actuation for Waterra Pumps to depths of over 200 feet (60m), in a fully portable, single operator power unit. The unit accommodates both High Flow (1 inch OD) and Standard Flow (5/8 inch OD) Waterra Tubing. At 29 pounds (13 kg), the PowerPack provides outstanding pumping performance.

The PowerPack is powerful enough to lift water from over 200 feet (60 m) depth using the Standard Flow System, and is so compact that it fits onto a back-pack frame. The PowerPack incorporates clamps for Waterra High Flow and Standard tubing sizes (adaptors are available for smaller tubes).

A Honda GX-25 series, 1.0 horsepower (747 watts), 4 stroke, gasoline motor powers this device, which can run for approximately 1 hour on one full fuel tank.

PowerPack including backpack and spark arrestor

This gasoline powered automatic actuator is for use with the Waterra Pumping System (Low, Standard and High Flow).

It is an excellent choice for those with moderate pumping requirements.

• fully adjustable and will adapt to almost any size casing or protective well casing and can also be used with flush grade well completions.
• anchored discharge end of tubing facilitates sample collection — the PowerPack supports the Waterra Pump System Tubing and also anchors the discharge end of the tubing facilitating sample collection.
• powered by the Honda GX25 a 25cc Mini 4-Stroke OHC gasoline engine — this lightweight motor is EPA/CARB compliant, runs on regular gas and has a quiet – pleasing “low” tone.
• includes a backpack frame making it completely portable. Using the PowerPack will result in a big boost to your field sampling program.
• perfect for purging and sampling 2” diameter monitoring wells up to 200 feet (60m) deep. This actuator is also great for use when developing monitoring wells.
• eliminates the fatigue that can be experienced on large monitoring programs.
• adapts to almost any size casing or protective well casing