Waterra Oil-Water Interface Sensors
$USD 665.70 – $USD 1,350.00
HS-2 Waterra Oil – Water Interface Sensors represent some of the most advanced technology available today for hydrocarbon product layer measurement. These devices utilize sophisticated ultrasonic sensors to help define the product layer. Tests have shown that these sensors are more sensitive in a broader range of hydrocarbon products than conventional optical systems.
Waterra Oil – Water Interface Sensors are available in two reel configurations:
Open Reel Closed Reel
The 3/8″ stainless steel flat tape tapes are Polyethylene coated.
Choose either:
- Metric tapes – graduated to the nearest millimetre
- Imperial tapes – graduated to the nearest 1/100 of a foot
As an option, Kynar coated tapes can be special ordered.
Description
Waterra Oil-Water Interface Sensors
HS-2 Features
- auto shut-off
- rugged modular construction
- powered by 4 AA batteries
- membrane ON/OFF switch
- extremely low power consumption
- sensor’s probe is 5/8″ diameter 316 stainless steel
- probe snaps into a probe holder on the side of the reel when not in use
- ultrasonic transducer used to detect hydrocarbons and a conductivity sensor to detect water
Polyethylene Coated Tape is standard
- dog bone tape cross-section design prevents adherence to wet surfaces such as well casings
- metric tapes are graduated to the nearest millimetre
- imperial tapes are graduated to the nearest 1/100 of a foot
- PFAS free
OPTIONAL
Kynar coated tapes which are tougher and more chemically inert may be available by special order but Kynar is a fluorocarbon (PVDF) so if PFOA or PFAS are concerns at your site, you may want to stick with the standard polyethylene tape. Kynar is:
- extremely non-reactive with many different substances
- extremely pure, strong, and able to resist heat, bases, acids, and solvents
- very resistant to ultraviolet rays
- Kynar coated tapes can be special ordered but please check for availability and timing
HS-2 Open Reel
The HS-2 line of Waterra Oil-Water Interface Sensors use tough, plastic reels to protect the stainless steel tape from damage and dirt while the tape is stored on the reel. They are made from black polyethylene and lightweight so are very portable.
The HS-2 Open Reel is available with Polyethylene coated tapes in metric units of 30, 50, or 100 meters or 100 or 250 feet.
As an option, Kynar coated tapes may be available by special order.
HS-2 Closed Reel
The HS-2 line of Waterra Oil – Water Interface Sensors use tough, plastic reels to protect the stainless steel tape from damage and dirt while the tape is stored on the reel. They are made from black polyethylene and their lightweight and slim profile make them very portable.
The HS-2 Closed Reel is only available with either a 30 meter or a 100 foot Polyethylene tape.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
Related Products…
-
This product has multiple variants. The options may be chosen on the product pageWaterra Water Level Indicators / Sensors
$USD 502.95 – $USD 641.55