Top Weights
- Both 2 inch and 4 inch Spring Clips illustrated
- Spring clip are for attaching tether line to HydraSleeve when no top weight is used.
- Reusable
Please leave a minimum slack in the tether line equal to the length of the Sampler you are using to allow the Sleeve to compress into the bottom of the well. A minimum of 48 hours should be allowed for equilibration time.
- Special 2-piece PVC Collar for use with SuperSleeves when Top Weight for compression into the bottom of the well is not needed.
- Similar to SuperSleeve top weight, the SuperSleeves thread between the top portion and locking ring and are held in place by the threads.
- Consists of a top threaded portion, and a threaded locking ring.
- Spring Clip tether attachment included
- To be used in conjunction with bottom weight (5, 8 or 11 ounce bottom weight recommended)
- Sand weight will not work because of the lack of density in water.
| SS COLLAR | |
|---|---|
| Length | 3" |
| OD | 1.9" (Fits in 2" Schedule 40 well & larger) |
- Optional two-piece 35-ounce top weight for use with SuperSleeves
- Top section is PVC and the bottom is stainless.
- the SuperSleeves feed between the top portion and locking ring and are held in place by the threads..
- Spring Clip tether attachment included
- Reusable
- Should be used in conjunction with 5, 8 or 11 ounce bottom weights
- Sand weight will not work because of the lack of density in water
| SS COLLAR | |
|---|---|
| Length | 3" |
| OD | 1.9" (Fits in 2" Schedule 40 well & larger) |