2 inch SuperSleeves
- Made from extruded material – no seams to leak.
- Standard material extruded opaque virgin poly, with blue check valve.
- Fits 2-inch schedule 40 wells — will not work in 2-inch schedule 80 or European 50mm wells.
- The size of the hardware determines which well diameter it works with.
- Compresses to approximately 10 inches from the bottom of the well using Top Weight for schedule 40 wells.
- Compresses to approximately 12 inches from the bottom of the well using Top Weight for schedule 80 and 50mm wells.
- Will require the 2-piece top weight or 2-piece collar along with a bottom weight
- Sleeve is lowered into the well fully extended below the weight, not rolled and inserted inside the weight.
| 2 inch SuperSleeve 1 L | |
|---|---|
| Sampler Length | 31 in |
| Filled Diameter | 1.9 in |
| Filled Volume | 1 L |
| Fill Stroke | 33 in |
| Top Weight | collar or 35 ounce |
| Bottom Weight | 5 or 8 ounce |
- Made from extruded material – no seams to leak.
- Standard material extruded opaque virgin poly, with blue check valve.
- Fits 2-inch schedule 40 wells and 2-inch schedule 80 or European 50mm wells.
- The size of the hardware determines which well diameter it works with.
- Compresses to approximately 16 inches from the bottom of the well using Top Weight for schedule 40 wells.
- Compresses to approximately 18 inches from the bottom of the well using Top Weight for schedule 80 and 50mm wells.
- Will require the 2-piece top weight or 2-piece collar along with a bottom weight
- Sleeve is lowered into the well fully extended below the weight, not rolled and inserted inside the weight.
| 2 inch SuperSleeve 1.5 L | |
|---|---|
| Sampler Length | 46 in |
| Filled Diameter | 1.9 in |
| Filled Volume | 1.5 L |
| Fill Stroke | 48 in |
| Top Weight | Collar or 35 ounce |
| Bottom Weight | 5 or 8 ounce |
- Made from extruded material – no seams to leak.
- Standard material extruded opaque virgin poly, with blue check valve.
- Fits 2-inch schedule 40 wells — will not work in 2-inch schedule 80 or European 50mm wells.
- The size of the hardware determines which well diameter it works with.
- Compresses to approximately 20 inches from the bottom of the well using Top Weight for schedule 40 wells.
- Compresses to approximately 24 inches from the bottom of the well using Top Weight for schedule 80 and 50mm wells.
- Will require the 2-piece top weight or 2-piece collar along with a bottom weight
- Sleeve is lowered into the well fully extended below the weight, not rolled and inserted inside the weight.
| 2 inch SuperSleeve 2 L | |
|---|---|
| Sampler Length | 60" |
| Diameter | 1.9" OD |
| Volume | 2 L |
| Minimum Well Diameter | 2" Schedule 40 |
| Pull to Fill Distance* | 62 in |
| Top Weight | collar or 35 ounce |
| Bottom Weight | 5 or 8 ounce |
- Made from extruded material – no seams to leak.
- Standard material extruded opaque virgin HDPE
- Fits 2-inch schedule 40 wells and 2-inch schedule 80 or European 50mm wells.
- The size of the hardware determines which well diameter it works with.
- Compresses to approximately 10 inches from the bottom of the well using Top Weight for schedule 40 wells.
- Compresses to approximately 12 inches from the bottom of the well using Top Weight for schedule 80 and 50mm wells.
- Will require the 2-piece top weight or 2-piece collar along with a bottom weight
- Sleeve is lowered into the well fully extended below the weight, not rolled and inserted inside the weight.
| 2 inch SuperSleeve HDPE 1 L | |
|---|---|
| Layflat | |
| Filled Diameter | |
| Filled Volume | 1 L |
| Fill Stroke | 36 in |
| Top Weight | collar or 35 ounce |
| Bottom Weight | 5 or 8 ounce |
- Made from extruded material – no seams to leak.
- Standard material extruded opaque virgin HDPE
- Fits 2-inch schedule 40 wells and 2-inch schedule 80 or European 50mm wells.
- The size of the hardware determines which well diameter it works with.
- Compresses to approximately 10 inches from the bottom of the well using Top Weight for schedule 40 wells.
- Compresses to approximately 12 inches from the bottom of the well using Top Weight for schedule 80 and 50mm wells.
- Will require the 2-piece top weight or 2-piece collar along with a bottom weight
- Sleeve is lowered into the well fully extended below the weight, not rolled and inserted inside the weight.
| 2 inch SuperSleeve HDPE 2 L | |
|---|---|
| Layflat | |
| Filled Diameter | |
| Filled Volume | 1 L |
| Fill Stroke | 66 in |
| Top Weight | collar or 35 ounce |
| Bottom Weight | 5 or 8 ounce |