Waterra HDPE Micro Flow Tubing

Description

Waterra HDPE Micro Flow Tubing (High Density Polyethylene) provides a stronger valve-tubing connection, especially with the male threaded valves, because it is stiffer and gives less when the valve is threaded into the tubing.

FEATURES

• produced from virgin polyethylene resins
• Waterra does not use any regrind product in any of our tubing
• does not contain any UV stabilizers*
• coils of tubing are individually poly bagged and are stored in sealed boxes, protected from UV light sources
• Waterra Foot Valves are guaranteed to properly fit onto and into Waterra tubing
• the HDPE resin supplier declares that PFAS class chemicals such as Polyfluoroalkyls, Perfluoroalkyl and Perfluoroalkyl substances (such as Perfluorooctanoic Acid (PFOA), Perfluorooctane Sulfonate (PFOS), Perfluorohexane Sulfonic Acid (PFHxS) or perfluoroalkyls) are not intentionally used and not expected to be present in the tubing.
• FDA approved resin – food contact applications in accordance with .21 CFR 177.1520
• Approximate Working Pressure @ 73 F
  • 1/4 x 3/8 in = 250 psi

Waterra maintains a considerable stock of High Density Polyethylene (HDPE) tubing and Low Density Polyethylene (LDPE) tubing in a broad range of diameters and lengths. Our tubing is of the highest quality available and we are always working to keep our prices more than competitive.

Our tubing is always virgin material and is carefully packaged to ensure that it is always clean when you receive it.

Waterra HDPE Micro Flow Tubing comes in 100, 200 (USA only) and 500 foot coils and measures 1/4 x 3/8 inch.