skip to Main Content

(905) 238-5242
sales@waterra.com

(905) 238-5242
sales@waterra.com

SIMPLE SOLUTIONS FOR GROUNDWATER MONITORING SINCE 1985
SIMPLE SOLUTIONS FOR GROUNDWATER MONITORING SINCE 1985

PA-10750 Low Flow Power Booster 2 for WSP-24V-3, 4 & 5 and WSP-12V-ND120 Submersible Pumps

CA$ 720.00

Engineered Specifically For:

This device will allow the user to regulate flow sampling as low as 40ml/min*. Simply connect the booster to a 12 volt deep cycle battery and connect the pump to the booster.

* Some situations may also require the use of the Flow Control Valve for precise low flow control.

SKU: Control – PA10750 Categories: , Tag:

Description

Controller Produces:

  • 0 volts with flow control dial set to lowest setting
  • 24 volts with flow control dial set to highest setting

Simply connect the booster to a 12 volt deep cycle battery and connect the pump to the booster.

PLEASE NOTE: Controller is not intended to shut off the pump motors.

 

High Performance Controller Features

  • engineered with reverse polarity protection
  • advanced thermal overload protection
  • heavy duty steel weatherproof case
  • low voltage disconnect (LVD) at 10.75 volts (turns off controller or allows pump to pulsate)
  • Constant Voltage Boosting Technology (CVBT) allows the correct voltage to reach the pump motors
  • fuse to protect electronics and user
  • 6 month parts and labor warranty
  • ‘Ramp Up’ control dial
  • 3 foot (0.9 m) wire lead to battery clamps and 5 foot (1.5 m) wire leads to pump connector

For Use with:

WSP-24V-3 Tsunami
WSP-24V-4 Monsoon
WSP-24V-5 Hurricane
WSP-12V-ND120 (Narrow Diameter Supernova 120)

Related Products…

Back To Top